TR CU 010

Sercons offers certification services of TR CU 010/2011 “On safety of machinery and equipment.”

EAC сertificate TR CU 010/2011

The EAC certification procedure begins by identifying equipment, defining the certification scheme, and collecting necessary documentation. The scheme choice depends on the type of procurement (series or batch) and is approved by the certification center. Three relevant certification schemes for compliance with the requirements and technical regulations of TR CU 010/2011:

  • 1C (series shipping) – implies the selection of samples for laboratory testing, assessment of the manufacturer’s site production, and further inspection control of certified equipment until the end of the conformity document validity;
  • 3C (batch shipping) – sampling for testing by an accredited laboratory;
  • 9C (batch shipping) – is limited by the assessment of documents submitted to the certification body.

EAC declaration TR CU 010/2011

The TR CU 010/2011 declaration registration process is similar to the registration of the EAC Certificate. The EAC declaration can be issued based on the applicant’s evidence base, when possible, for the selected scheme (1D and 2D) and in accredited centers – by other schemes (3D, 4D, 5D, and 6D).:

  • recorded results of laboratory and bench tests;
  • documents certifying the quality of essential components and assemblies;
  • Documents certifying equipment compliance with safety requirements.

Cost and terms for registration of a TR CU 010/2011 Certificate and Declaration

With Sercons, you can count on the affordable cost of services and prompt implementation of all necessary procedures.

ServicePriceTerms
EAC Certificate of Conformity TR CU 010from 1200 Eurofrom 14 days
EAC Declaration of Conformity TR CU 010from 700 Eurono later than 5 days from the date of application’s receipt

The technical regulation TR CU 010/2011 “On safety of machinery and equipment” was prepared and adopted to unify the mandatory requirements and technical regulations for all life cycle processes (design & manufacture to disposal) of machines or equipment put into circulation on the Eurasian Customs Union member states territory.

Advantages of having an EAC Certificate

  1. Owners of the TR CU 010/2011 Certificate can freely supply, move and sell machinery and equipment on the territory of the Eurasian Customs Union member states.
  2. Certification and declaration are two forms of conformity. In the first case, the document is valid for 1 to 5 years ( no time limit for batch shipping). The declaration registered for a similar period: from 1 to 5 years.
  3. The technical regulation of the Customs Union TR CU 010/2011 “On safety of machinery and equipment” covers not only machines and equipment indicated in the list of declarations but also on equipment operated on HIFS.

Procedure of documents registration in compliance with TR CU 010/2011 requirements

Turning to Sercons, you will find a reliable partner. We’ve been providing EAC certification services for over 25 years. We offer prompt, high-quality, and affordable execution of documents in compliance with the requirements of TR CU 010/2011, which will allow you to avoid errors leading to its cancellation.

Differences between TR CU 004, TR CU 020, and TR CU 010 сertificates

For certain groups of products included in the unified list of Technical Regulations of the Eurasian Customs Union, confirmation of compliance in the form of certification is mandatory. That fully applies to agricultural, low-voltage equipment and equipment operating under excessive pressure, as well as to devices whose continuing operation depends on the influence of external electromagnetic interference.

Groups of products covered by the TR CU 010/2011, TR CU 004/2011, and TR CU 020/2011. The difference between the EAC Certificates is in scope:

A permitting certification document TR CU 010/2011 is registered for such types of products as:

  • explosion-proof equipment, as well as those powered by drives (pneumatic, hydro) and voltage over 1000 V;
  • hoisting and road-building machines;
  • bicycles, cutters, milling tools, grinding wheels, screwdrivers;
  • tools (hand, battery, or electric).

Registration of the TR CU 020 EAC Сertificate is mandatory for the following:

  • explosion-proof equipment operating voltages exceeding 1000 V;
  • weight-lifting and road construction transport;
  • tools (hand, battery, or electric);
  • ACC (Automation and control cabinets), low-voltage switchboards.

Mandatory registration of TR CU 004/2011 EAC Сertificate is required for:

  • spare parts and components;
  • tools (hand, electric, or battery);
  • ACC (Automation and control cabinets) and low-voltage complete devices cabinets (LVD).

List of products subject to TR CU 010/2011

List of technical regulation subjects to confirmation of compliance with the requirements of TR CU 010/2011 in the form of certification:

  1. Woodworking machines for household use
  2. The all-terrain vehicle, snowmobiles, and trailers
  3. Garage equipment for motor vehicles and trailers
  4. Agricultural machines
  5. Small-scale mechanization tools for gardening and forestry applications, including electric ones
  6. Machines for livestock, poultry, and feed production
  7. Mechanized tools, including electric
  8. Technological equipment for logging, timber exchanges, and timber melting: gasoline-powered saws, electric chain saws
  9. Technological equipment for trade enterprises, public catering, and food processing units
  10. Equipment for overburden and cleaning operations: combine harvester; mechanized complexes, powered supports
  11. Mining equipment: combines for coal and rock, metal supports for preparatory workings
  12. Equipment for shaft lifts and mine transport: mine conveyors, mining winches
  13. Equipment for drilling boreholes and wells, equipment for charging and driving blast wells: pneumatic drills (drill hammers), hammers, machines for drilling wells in the mining industry, drilling rigs
  14. Ventilation and dust suppression equipment: mine fans, means of dust collection and dust suppression, oxygen compressors
  15. Lifting and transporting equipment, lifting cranes

List of objects subject to confirmation of compliance with the requirements of TR CU 010/2011 in the form of EAC declaration

  1. Turbines and gas-turbine installations
  2. Heavy-duty cars
  3. Crushers
  4. Diesel generators
  5. Devices for lifting operations
  6. Conveyors
  7. Industrial floor no-rails transport
  8. Technological equipment for trade enterprises, public catering, and food processing units
  9. Chemical and oil and gas processing equipment
  10. Equipment for processing polymer materials
  11. Pumping equipment (pumps, aggregates, and installations)
  12. Cryogenic, compressor, refrigeration, autogenic, gas cleaning equipment:
  • air separation and rare gas installations
  • equipment for the preparation and purification of gases and liquids
  • heat and mass transfer equipment of cryogenic systems and installations, compressors (driven by air and gas)
  • refrigeration units
  1. Equipment for gas-flame processing of metals and metallization of products
  2. Gas-cleaning and dust-collecting equipment
  3. pulp-and-paper equipment
  4. Papermaking equipment
  5. Oilfield equipment, drilling, and geological exploration
  6. technological and for applying paint equipment and varnish coatings equipment
  7. Equipment for liquid ammonia
  8. Equipment for preparation and purification of drinking water
  9. Metalworking machines
  10. Forging and pressing machines
  11. Woodworking equipment (except household woodworking machines)
  12. Technological equipment for foundry production
  13. Equipment for welding and thermal spraying
  14. Industrial tractors
  15.  Autoloaders
  16. Bicycles (except for children)
  17. Machines for earthmoving, land reclamation, quarry development, and maintenance
  18. Road vehicles, equipment for preparing construction mixes
  19. Construction equipment and machinery
  20. Equipment for the construction materials industry
  21. technological equipment for logging, timber exchanges, and timber melting (except for gasoline-powered saws and electric chain saws)
  22. Technological equipment for the peat industry
  23. industrial laundry equipment
  24. Equipment for dry cleaning and dyeing of clothing and household products
  25. Machinery and equipment for public utilities
  26. Industrial fans
  27. Industrial air conditioners
  28. Air heaters and air coolers
  29. Technological equipment for the light industry
  30. Technological equipment for the textile industry
  31. Technological equipment for the production of chemical fibers, fiberglass, and asbestos threads
  32. Technological equipment for the food, meat, dairy, and fish industries
  33. Technological equipment for the flour-milling, feed, and grain elevator industry
  34. Technological equipment for trade enterprises, public catering, and food processing units
  35. Printing equipment
  36. Technological equipment for the glass, porcelain, earthenware, and cable industries
  37. Heating boilers that run on liquid and solid fuel
  38. Gas and combined burners (except for block ones), liquid fuel, built into equipment intended for use in technological processes at industrial enterprises
  39. Water-heating and heating devices that run on liquid and solid fuel
  40. Milling cutters:
  • cutters with polyhedral carbide plates
  • cutting and slotting mills made of high-speed steel
  • carbide cutters

Cutters:

  • lathe tools with brazed carbide inserts
  • a lathe with multi-faceted carbide plates

Circular saws with hard-alloy plates for processing wood materials

Locksmith and assembly tools with insulating handles for work in electrical installations with a voltage of up to 1000 V

Mounted cutters:

  • wood-cutting mounted cutters with back-mounted teeth
  • shell-wood processing mills with blades of steel or carbide; cutters shaft-mounted cylindrical national teams

Tools made of natural and synthetic diamonds:

  • diamond grinding wheels
  • diamond cutting circles

Tools made of synthetic super hard materials based on boron nitride (Elbor tools):

  • grinding wheels

Industrial pipeline fittings

Abrasive tool, abrasive materials:

  • grinding wheels, including hand tools
  • cutting wheels, polishing wheels
  • petal grinding wheels
  • endless sanding belts
  • fiber grinding wheels

To get a free consultation on EAC certification of TR CU 010/2011, please, contact our Sercons specialists.

You can also order a callback or leave an online request.